简 历
姓名 : 陈风叶 性别： 男
出生地： 河南叶县 出生年月： 1972 年 1 月
第一学历： 大学本科（工学学士） 专业 ：电力系统及其自动化
第二学历： mba （武汉大学上海班， 在读）
目前职务： 工程部电气课课长 （电气经理） 专业技术 职称： 工程师（ 2000 年晋升）
目前公司： 宝泰菱工程塑料（南通）有限公司 （美日合资经营，投资1.4亿美元）
电话 ： 13626****** 0513-85986***( 办 ) 0375-89734** （家）
e-mail: cfy****@***.***
通信地址： 江苏南通经济技术开发区民兴路 171 号 宝泰菱工程塑料（南通）有限公司 工程部 （邮编 22600* ）
求职意向/工作地点 ： 大型外资的企业、工程公司的工程类中高级管理职位，能够充分运用自己多年来在大型化工企业所积累的电气领域的设计、设备选型、安装、试车、维修经验和管理能力，比如 工程维修部经理，电仪经理， 项目经理或资深工程师或相近职务，地点不限

背景介绍：
九年大型国企的主管经历，六年的大型外企管理层和经理经历，历经了两个大型项目的筹建和试车生产，掌握大型化工工厂电气设备从选型设计和安装调试到维修保全和年度大修的全部过程。
技术方面，从传统的电力系统和电厂电气设备到生产工艺中的自动化控制设备，无论是电气专业的规范规程，还是具体的设备性能，扎实的专业理论知识，十五年努力工作所积累的经验和对设备和设计缺陷的及技改经历，自信能够妥善解决在试车和生产中任何可能在电气方面所遇到的问题。
管理方面，为两大家公司分别打造 出一支优秀的电气团队，磨练出了作为管理者的在不同的情况下与不同类型的人打交道的能力。多年的经历，锻炼出了与承包商、制造商的良好的沟通合作能力和对进度的管理能力。
在工作和生活中，充满乐观自信，团结合作，踏实进取，不惧艰辛。

主要业绩和技能：
技术方面：
对于电力系统继电保护参数的计算能力，曾经算核算110kv变电所保护定值，核算2500kw大型压缩机启动时6kv母线压降；
善于通过分析发现并解决设计缺陷、运行中的设备故障，曾经解决过6kv进线电压互感器的磁路饱和及波形畸变，6kv电源备自投的设计改造；通过审查图纸发现设计缺陷——汽轮机事故停车时未能联跳发电机，从而将导致极严重后果，对此设计及时整改为公司挽回愈百万的损失； 根据设备故障现象准确分析判断出谐波对电子类继电器的影响，从而进行增加谐波滤波器的改造；完成装置新增设备的防雷设计，等等
管理协调能力及其他方面：
带领团队创造过市级“青年文明号”；激励部下创新钻研，一名优秀的下属从而获2007年“江苏省科技创新能手”的荣誉称号。善于协调和控制工程承包商的工作进度，顺利完成历年的停电检修计划； 与供电公司、承包商、供应商及本公司内部兄弟部门建立并保持了良好的支持和协作关系；2007年10月，利用自己拥有的法律知识成功的为公司挽回20万元的设备赔偿损失
工作经历：
一：宝泰菱公司工作期间：
2006/6~今 工程部电气课课长, 统筹负责全厂电气设备的预防性维修保全，对下属的激励管理和绩效考核，控制电气维修成本，审核全厂电气设备维修计划和方案，审核或编制项目技改方案，指导技术员在关键设备或紧急状态下电气设备的维修。包括变电站高、低压设备及生产现场电机和自动化设备、空调、无线队讲、有线广播、等等。
其中，2009年成功组织和了主持公司机械、电气、仪表三个课的年度检修，包括完成塔t-3301的改建工程等。目前，核心设备挤出机切刀系统改进工程的电气负责人。
2004/4~2006/5 工程部电仪课电气工程师，编制全厂电气设备维修计划和方案；提供维修及备件的预算成本，控制电气设备的维修费用；为工厂新增项目提供电气设计，或依据有关规范规程审查承包商提供的电气设计；指导技术员在关键设备或紧急状态下电气设备的维修。其中，2004/5~12，兼任电仪主管
所承担、完成的项目、工作：
2004/05~09 负责完成全部电仪人员的电气专业培训工作，参与完成 110kv 总降压站的 供电合同等一系列 ，入网手续，成功组织 110kv 总降压站的投运
2004/10~12 在承建方没有进行单机试车（低压电机）的而宝泰菱被迫直接 联合试车的 情况下，负责完成 公司6kv 主配电所全部低压电气设备的验收、调试，成功组织投运
2005/03~05 完成全厂电气设备的保全标准作业指导书的编制
2005/07~09 负责编制全厂电气2005年度停电大修方案，并指挥圆满完成电气年度检修项目；并完成对14台高压电机控制回路的技改设计
2004/11~2006/04 在不影响正常生产的情况下， 负责完成主配电所等全厂近300台电压电机的继电保护及dcs信号的技改项目及设计改造的图纸制作
2004/12~2006/05 负责完成工艺陆续要求增加的47台设备的电气部分的设计及安装
2005/10~12 负责完成3台6kv压缩机更换改造项目的电气工作
2006/5~10 负责编制并顺利实施全厂电气2006年度停电大修方案，并妥善确定承包商；并指导制定并组织完成污水配电设备的大修期间的技术改造及图纸设计
2007/3 完成聚合楼风向仪的避雷设计和安装
2006/10~2007/10，完成针对系统瞬时停电而进行的技术设计方案，完成总降压站自动录波的技术设计；根据设备故障现象准确分析判断出谐波对电子类继电器的影响，从而进行增加谐波滤波器的改造。
2007/5~10 负责编制并顺利实施全厂电气2006年度停电大修方案；指导并组织完成20余台新增电机的改造项目和设计图纸的完成
2009/6至今被任命为年度维修的项目负责人，统一负责协调全公司的机械、电气、仪表的年度维修
负责公司生产工艺的关键设备挤出机、反应器、及唯一的一条包装线的保全
二：中国神马集团 河南神马 尼龙化工有限公司工作期间：
2003/5~2004/4 电气厂公司生产装置工段段长。负责 tec 变电站 （ 引进 toyo engineering corp 国外装置，包括硝酸-苯精制、环己醇、己二胺、己二酸、成盐切片等）、制氢变电站等；
1997/1~2003/5 任电气厂公用工程工段段长。负责总变电站（含发电机）、热电站、空分、供水等变电站, 2000 年，晋升工程师并被聘用；
1995/7~1996/12 公司生产准备处任电气专业组组长，负责公司电气专业的生产培训和试车方案的编制
所承担、完成的项目、工作：
1997/1~1997/12 作为公司的甲方代表负责总变电站 110kv 组合电器、 6kv 设备、微机自动化保护监控装置安装、调试、验收的全部工作，编制试车方案并成功组织投运
1999/1~1999/6 负责公司 15000kw 发电机等设备的安装、调试、验收工作，编制试车方案并成功组织投运
负责组织公司公用工程电气系统（总变电站、热电站、空分、供水等变电站）历次大修
三：熟悉的国内外设备、电器情况等：
熟练掌握南瑞 110kv 、 6kv 变电站、 qf-15 汽轮发电机等的 继电保护及同期装置运行维修，发电机自并励系统
熟悉 ｎ ewlong 包装机、不二机械手臂、 jsw 大型挤出机、 atlas 压缩机、 德国 loher 、日本 mitsubish 、瑞士 abb 的等大型变频柜 ，三菱 plc ，科泰应急发电机等

教育、培训、职业证书、外语水平
教育（第一学历）：
1991/9~1995/6 郑州工学院（今郑州大学）电力系统及其自动化专业
毕业实习在郑州热电厂4*200mw机组（1月），三门峡水电站实习（2周），毕业设计4*10500*kw发电厂设计获大组答辩第一名
培训 ：
1995/8~1995/12 中国神马集团河南尼龙化工公司日语口语半脱产培训
1996/6 南京电力系统自动化研究院（南瑞集团）微机监控保护系统培训（脱产2周）
1998/12 河北工业大学发电机励磁系统培训（脱产2周）
2002/4 作为中层干部后备人选参加神马集团公司委托毕马威公司组织的腾越项目培训（半脱产1周）
2001~2004 自学法学理论、法制史、刑法、民法、公司法、合同法、劳动法等法律知识
2004/6 ~11 参加宝泰菱公司委托南通大学组织的英语口语培训
2004/ 12 参加宝泰菱公司委托威克特管理咨询公司组织的督导管理人员培训
2004/12 参加宝泰菱公司委托威克特管理咨询公司组织的质量控制管理培训
2005/09 参加宝泰菱公司委托威克特管理咨询公司组织的质量/环境内审员培训，并获证书
2006/03 参加宝泰菱公司委托威克特管理咨询公司组织的企业内部培训师培训
2006/06 参加宝泰菱公司委托威克特管理咨询公司组织的生产主管管理技能培训
2006/11 参加宝泰菱公司委托人众人公司组织的拓展训练，并获证书
2007/4 参加江苏省经贸委组织的能源节约与管理培训，并获江苏省能源管理资格证（江苏经贸委注册）
2007/2~9 数次参加宝泰菱公司委托bsi公司组织的ohsas18001内审员培训，并获证书
2008/06 台湾宝理工程塑料有限公司培训
职业证书：
工程师证
中华人民共和国特殊作业操作证 （类别：电工作业，操作项目：运行维修）
停送电联系人证（江苏南通），进网作业证、调度员证（国家电网）、三种人证（工作票签发人）等
宝泰菱公司 iso/ts16949：2002 审核员证；iso/14001：2004 环境审核员证，ohsas18001：2007 安全卫生职业健康审核员证
外语水平：
英语：流利的听、说、读、写，可与外国专家专业交流
其它能力或知识：
比较系统的 法学理论、法制史、刑法、民法、公司法、合同法、劳动法等法律知识及运用能力
熟练操作使用erp 企业软件，visio矢量制图软件、auto-cad

主要科技成果 ：
1995 年，大学 毕业设计4*10500*kw发电厂设计获大组答辩第一名
1998 年，通过对神马尼龙公司 2500kw 压缩机启动电流的计算得出该机组可以直接启动的结论，从而大大简化了原设计的运行操作方式
神马尼龙公司总变电站 6kv 进线电压互感器设计及项目改造，获 2000 年公司科技成果三等奖
神马尼龙公司总变电站 6kv 备用电源自投装置设计及项目改造，获 2002 年公司科技成果三等奖
2000 年，完成的发电机控制回路改造项目为公司挽回直接经济损失逾百万元。原设计中，汽轮机事故停机时没有联跳发电机，一旦汽轮机事故后果极其严重，试车中我发现此问题并及时技改。
2002 年，组织编写并审订《130吨 3# 炉电气运行规程》 (50000 字 )

主要文字版物情况：
《神马尼龙公司110kv总变电站电气运行规程》（ 30000 字） ， 《神马尼龙公司 15000kw 发电机运行规程》（ 11000 字）
《宝泰菱公司110kv总降电站电气运行规程》（ 50000 字），宝泰菱公司电气设备保全系列iso文件
所获荣誉：
神马尼龙工作期间，多次获集团公司级、公司级先进工作者，技术明星等

resume
name: chen fengye sex: male
hometown: henan province birth date: january 1972
academic degree: bachelor major: electric power system and its automation
second degree ： mba ( wuhan university, 2007-2010)
current position: electrical section manager (in e&m department)
present company: ptm engineering plastics ( nantong ) co., ltd
(joint venture between usa and japan with the investment $ 140,000,000)
tel: 13626****** 0513-85886*** (o) 0375-89734** (h) private email: c fy****@***.***
position applied for : engineering & maintenance manger, electrical manger, project manager or related position

self-deerrorscription
with the experiences of 9 years as supervisor in national company and 6 years as manager level in a foreign-capital enterprise, with the experiences of construction, the commissioning and operation of two big type plants, i mastered the procedures of one big type plant errorform the design and the construction to the commissioning and the maintenance.
in technology and skills, i mastered the electrical regulation and the codes, and familiar with the characters of equipments from hv electricity power system to lv automation control system. in addition to the deep knowledge of power plant and the experiences to solve the various troubles, i have the ability to solve or manage any electric issue.
in management aspect, i estiablished and organized two excellent teams for above both company. my experiences convice me that i have gained the abilities and skills to communicate with all kinds of people in different situations, as well as to build the harmonic relation with the power authority, the contractor.
with optimistic and tough character, i always have a good communications with my colleagues and friends.

main achievements and skills
skills:
i have the ability to calculate the errorparameter of electric power system for relay protection. i confirmed and calculated the relay protection errorparameters of 110kv substation, and the voltage of 6kv bus when 2500kw motor starting. i am good at analyzing the drawing and the phenomenon to solve the trouble of design and equipments. i solved the troubles, such as the issue of deerrorformed wave with the 6kv voltage pt, the issue of 6kv automatic transfer system (ats), the issue of the interlock between the 15000 kw generator and the turbine, the issue to avoid the harmonic wave in lv bus, and to add the lightning-proof rod for new equipments, and so on.
management:
in 2000, my group won the “young people enlightened” title city rank. in 2007, one of my subordinates won the title of “innovation master-hand of jiangsu province ”. i have built and kept the harmonic relations with the power authority, the contractor, and the others department in ptm, and managed the construction, commissioning and asd maintenance successfully. in oct 2007, i used the law knowledge to retrieve 20000* rmb from the supplier.

working experience
in ptm co., ltd since june 2006, as the electrical section manager, i have managed the operation and maintenance of all the electric equipments, controlled the budget of electric maintenance for keeping it in a proper level, according to the regulations and cords design the drawing, approved or checked upon the drawing from the contractor for the adding equipment, directed the technician to maintain the important equipment or to repair it in the emergency condition. it covers the high-voltage and low-voltage equipments in substation, the motors and automatic equipments at sites, air-conditioners, walkie-talkie system, broadcast system, and so on.
in 2009, as project leader, i managed and completed annual shutdown maintenance of mechancial section, electrical section and instrument section, including the project of t-3301 (tower) improvement. in 2010, as electrical charge person to manage the project of cutter system improvement for key equipment of extruder.
may 2004-may 2006, in the position electrical engineer, i established the pm system for all electric facilities. according to the regulations and cords design the drawing or check upon the drawing from the contractor, i completed the projects to add equipments for production department, direct the technician to maintain the important equipment or to repair it in the emergency condition(during the period from may to december in 2004, i held the posts of e engineer, and electrical & instrument supervisor concurrently.)
1 i joined in and completed all the process of the contact with psb (power supply bureau), and organized the training and completed the commissioning of the 110kv rss (receiving substation).
2 i organized the commissioning of mss (6kv the main substation). because the contractors had not done solo test running of all the low voltage motors, the load commissioning in the mss became a very difficult issue. however, i organized the technicians to complete it.
3 i edited the overhaul plan in detail for all the electric equipments during annual shutdown, and organized the technicians to complete it successfully in september, 2005.
4 in 2005, i designed the drawing and organized to modify near the 300 sets of relay protections and the signals for dcs of the important motors without impact to the production department.
5 i designed the drawing and organized to add about 30 motors that were demanded by the production department.
6 i was in charge the project to replace 3 sets of 6kv compressor, and completed in dec. 2005.
7 i completed the detail plan of annual shutdown maintenance in 2006 and 2007, selected the proper contractors for asd maintenance, and organized to complete it.
8 i guided and organized the senior technicians to complete the design of wwt modification (40 set motors) in 2006, and the tox project modification (20 set motors) in 2007.
9 i have been completing the projects, such as to avoid or debase the effect of instantaneous electric power failure, to add the auto-recorder in rss, and to add the harmonic wave filter (basing my analyses to the complicated phenomenon)
10 since june 2009 ， i have been appointed as the project leader of annual shutdown maintenance pererrorformance, to organize and coordinate the production depart and engineering & maintenance department, which include mechanical section, electrical section, and instrument section.
in henan shenma nylon chemical industry co., ltd of shenma group china co., ltd
1 may.2003-apr.2004 the electrical supervisor of tec section to manage substations of tec unit (the factories and the facilities provided by toyo engineering corp) and the hydrogen unit
2 jan.1997-may.2003 the electrical supervisor of utility section to manage the 110kv main substation, the substation of power plant, the substations of air-press unit, water-supply unit, and the 15000kw generator. and i kept the safety running of the main substation in long period of 2000 days
3 jul.1995-dec.1996 as the group lead of the electrical specialty group in charge of the training and the commissioning of electric specialty in production preparation department
4 to manage the overhaul of the electric equipments of the utility every time of annual shutdown (asd)

equipment mastered or is familiar with
the electric equipments and its relay protection in 110kv and 6kv substation, 6kv steam-turbine generator (qf-15 mw) including its the relay protection and the exciting system are mastered.
the newlong bagging machine, jsw extruder, atalas air compressor, loher converter (big type), abb converter (big type), mitsubish converter (big type), emergency generator, plc, and so on, are been familiar with.

education / training / professional certificate / english level
sept.1991-jun.1995 power system and its automation in zhengzhou university , bachelor
practiced in zhengzhou power plant (4*200mw generators) in oct.1994
practiced in sanmenxia water power plant in mar.1995
graduation designs was the design of power plant (4*10.5mw generators) which was classfied as top rank.
training
training of japanese oral from aug. to dec. in 1995
training of integration substation automation (isa) in nari group (nanjing automation research institute) in nanjing in jun. 1996
training of exciting system of the generator technology in hebei university of technology in dec.1998
tengyue item as one spare middle-level cadre trained by kpmg co. in apr. 2002
the theory of law, history of legal system, criminal law and civil code etc. learned by myself from 2001 to 2004
training of the control and management of the production quality that trained by victor management consulting co., ltd by in dec. 2004
training within industry for supervisor (twi) that trained by victor management consulting co., ltd in dec. 2004
training of ts/iso 2004 & 16949 and attained the certificate as the internal auditor of ptm that trained by victor management consulting co., ltd in sep. 2005
training as the internal trainer of ptm that trained by victor management consulting co., ltd in mar. 2006
training within industry for supervisor (twi) that trained by victor management consulting co., ltd in jul. 2006
training of outward development that trained by genesis education group co., ltd, and attained the attendance certificate
training of power-saving and management that trained by economic and trade committee, jiangsu , and attained the license of power management
training of ohsas18001 and attained the certificate as the internal auditor of ptm that trained by bsi in oct. 2007
training in polyplasticstaiwan co., ltd in june 2008.
professional certificate professional and technical credentials by the personnel department of henan province
special operator credentials by safety production supervision bureau of china
all high voltage electric certificates requested by psb nantong, jiangsu
the certificate as the internal auditor of ts/iso 2004 & 16949, iso/14001:2004, ohsas18001:2007
english level oral and written english skills
others erp software, visio software, auto-cad
i am familiar with the theory of law, history of legal system, criminal law and civil code etc
technical achievements in detail in shenma group china co., ltd
by calculating the starting current of the 2500kw motor in 1998, i decided the way to start up the motor directly, the way optimized the operation procedure that original designed.
i completed the design and the modification of 6kv pt in main substation, which was awarded the 3 rd rank award of the company in 2000. there was a deerrorformed wave with the 6kv voltage pt, caused by the third harmonic wave and magnetic saturation. i modified it by connecting the second coils in the correct way.
i completed the design and the modification of control system of the generator. there was one bad mistaken in the design, which when the steam turbine shut down, there was not interlock to trip the generator. i found it out and modified in time in 2000.
i completed the design and the modification of 6kv automatic transfer system (ats) in main substation, which won the 3 rd class award of the company in 2002
i organized technicians to edit the electric operational procedure of the 3 rd furnace (130t/h) in 2002.
in ptm co., ltd
i organized the training and completed the commissioning of the 110kv rss (receiving substation) and mss (the main substation).
i have been in charge the maintenance of the very important equipments, as the extruders, the reactors, and the bagging machine.
published paper etc
in shenma group china co., ltd
electric operational procedure of 110kv main substation (executed by the company since 1998)
electric operational procedure of 15000kw generator (executed by the company since 1999)
in ptm co., ltd
electric operational procedure of 110kv receiving substation (executed by the company since 2004)
a series of standard operational procedures (sop for iso) for all the electric maintenance
honor gained
excellent employee of the group company and the company, technique star of the company in shenma several times